Method of moments analysis of EM fields in a multilayered spheroid radiated by a thin circular loop antenna

This paper presents derivation and computation of electromagnetic (EM) fields inside a dielectric prolate spheroid radiated by a loop antenna. The dielectric spheroid is considered to be multilayered, and a thin circular loop antenna that is loaded by a voltage source radiates on the top of the prolate spheroid. The multiple interaction of transmitted and reflected waves with the spheroid is characterized by applying the method of moments (MoM) to both the circular loop antenna wire and the stratified spheroidal interfaces. The dyadic Green's function in the expansion form of eigenvector wave functions is used to derive the EM fields, so the formulation is quite compact. Different basis and weighting functions are used inside the method of moments procedure for obtaining in an efficient way the unknown current distributions along the antenna wire and the unknown expansion coefficients of their resulted EM fields. Current distributions and the transmitted fields inside the spheroidal model are computed numerically and the convergence issues are discussed.     

Inter‐particle contact heat transfer model: an extension to soils at elevated temperatures

A simple ‘inter‐particle contact heat transfer’ model for predicting effective thermal conductivity of soils at moderate temperatures (0–30°C) has been extended up to 90°C. The extended model accounts for latent heat transport by water vapour diffusion in soil air above the permanent wilting point; below that point, the soil thermal conductivity is approximated by linear interpolation without latent heat effect. By and large the best results are obtained when the latent heat is used only in the ‘self consistent approximation’ model with an overall root mean square error of 35% for all soils under consideration or 26% when excluding volcanic soils. This option can also be applied to moderate temperatures at which the enhanced heat transfer is negligibly small. Copyright © 2005 John Wiley & Sons, Ltd.     

Transfection of the gene for B7-1 but not B7-2 can induce immunity to murine malignant mesothelioma

A 56-year-old female with rheumatoid arthritis was admitted because of bilateral hip pain. In a few months of her hospitalization, a relatively abrupt renal dysfunction was emerged besides complement breakdown, and renal biopsy revealed crescentic glomerulonephritis. Immunofluorescence study showed peripheral granular deposits of IgG, IgM, and C3 in the glomeruli. Cresents were predominantly composed of macrophages and glomerular epithelial cells. Amyloid nephropathy, renal vasuculitis, and association of other collagen vascular diseases were negligible for the causative factor. It was suggested that immune complexes were formed in the glomeruli, in which both humoral and cellular immune responses were to be induced, that brought cescents formation in the lesions. Crescentic glomerulonephritis in patients with rheumatoid arthritis is rare and a possible pathogenetic mechanisms involved in the development of renal dysfunction are discussed with the special reference to immune complex-induced inflammation.     

A dual-mode bandpass filter with enhanced capacitive perturbation

A dual-mode ring bandpass filter with two pairs of capacitors has been designed. The capacitors are used to control the location of the even- and odd-mode frequencies independently, allowing weak coupling for narrow-band filter design with realizable capacitance values. Theoretical expressions have been derived for these frequencies. A 4% bandwidth bandpass filter centered at 1.9 GHz was designed and tested with good agreement between theoretical and measured results.     

Pressure electrical contact improved by carbon black paste

Pressure and pressureless electrical contacts were evaluated by measuring the contact electrical resistivity between copper mating surfaces. Pressure electrical contacts with a contact resistivity of 2×10⁻⁵ Ω·cm² have been attained using a carbon black paste of a thickness of less than 25 μm as the interface material. In contrast, a pressureless contact with silver paint as the interface material exhibits a higher resistivity of 3×10⁻⁵ Ω·cm² or above. A pressureless contact with colloidal graphite as the interface material exhibits the same high contact resistivity (1×10⁻⁴ Ω·cm²) as a pressure contact without any interface material. On the other hand, pressureless contacts involving solder and silver epoxy exhibit lower contact resistivity than carbon black pressure contacts.     

Detailed analysis of high‐quality symmetrical octagonal spiral inductors on Si substrate

Research studies of symmetrical spiral inductors for silicon technology have become very important and challenging. In this article, we attempt to give a detailed explanation of how symmetrical spiral inductors help to improve the quality factor (Q) as compared to conventional nonsymmetrical inductors. The experimental results are presented to verify our theory. © 2005 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2005.     

Improving the electrical and mechanical behavior of electrically conductive paint by partial replacement of silver by carbon black

Partial replacement of silver particles by carbon black (low cost) in electrically conductive paint was found to decrease the electrical resistivity and increase the scratch resistance of the resulting thick film, which is for use in electrical interconnections. An effective carbon black content is 0.055 of the total filler volume. By using a total solid volume fraction of 0.1969 and a silane-propanol (1:1 by weight) solution as the vehicle, a paint that gives a thick film with resistivity 2 × 10⁻³ Ω·cm has been attained.     

Effect of heat‐sealing temperature on the failure criteria of oriented polypropylene/cast polypropylene heat seal

Failure criteria of the heat‐sealed part of oriented polypropylene (OPP) and cast polypropylene (CPP) heat seals made by an impulse type heat‐sealing machine were investigated. Circular notches and precracks were introduced to direct failure to specific areas such as inside the seal, at the border, or at the unsealed part. The notched strength as a function of heat‐sealing temperature revealed that the seals were stronger in the transverse direction (TD) as compared with the machine direction (MD). Tensile failure that occurred inside the heat seal is more sensitive to sealing temperature, whereas that at the unsealed part is immune. The stress intensity factor (K₁) is generally higher along the TD. At high sealing temperatures, i.e. above 150°C, orientation in the OPP film is relaxed and this results in consistently low mechanical properties at this temperature range. This morphology was revealed by studies of crystalline orientation state and FTIR imaging. POLYM. ENG. SCI., 46:205–214, 2006. © 2005 Society of Plastics Engineers     

A Haptic Knob for Rehabilitation of Hand Function

This paper describes a novel two-degree-of-freedom robotic interface to train opening/closing of the hand and knob manipulation. The mechanical design, based on two parallelogram structures holding an exchangeable button, offers the possibility to adapt the interface to various hand sizes and finger orientations, as well as to right-handed or left-handed subjects. The interaction with the subject is measured by means of position encoders and four force sensors located close to the output measuring grasping and insertion forces. Various knobs can be mounted on the interface, including a cone mechanism to train a complete opening movement from a strongly contracted and closed hand to a large opened position. We describe the design based on measured biomechanics, the redundant safety mechanisms as well as the actuation and control architecture. Preliminary experiments show the performance of this interface and some of the possibilities it offers for the rehabilitation of hand function.     

Digital wireless sensor server using an adaptive smart-antenna/retrodirective array

A wireless sensor server is developed based on a reconfigurable active smart-antenna/retrodirective array. The system can serve as both a retrodirective array transponder and a smart-antenna receiver simply by changing the frequency of the local oscillator applied to the mixers, enabling it to utilize its hardware best to suit its communication environment. When operating as a direct-conversion receiver, the receiver array successfully demodulates a quaternary phase-shift keying (QPSK) modulated signal with circuit gain of 7 dB, and E/sub b//N/sub 0/ for BER=10/sup -4/ is approximately 12 dB without any error correction. In the retrodirective array mode, the system provides 20 dB circuit gain and 20 dB radio-frequency/intermediate-frequency isolation at the center frequency as well as phase conjugation, exhibiting excellent retrodirectivity. The mixers perform phase conjugation and modulation simultaneously, enabling the transmission of locally stored data. The local data is successfully extracted by an interrogator.